Ang?nieux retrofocus

I want to introduct something about nonwoven agriculture cover. Non-woven fabric's special characteristics make it exceptionally resistant to splittingeven when stretched tightly across the ground. The non-woven film has alsobeen designed to retain its effectiveness for the duration of your crop. Raising the value of your crop1. Lightweight to gently protect without crushing delicateyoung shoots and new growth. 2. U.V. stabilized structure gives long-lasting protection. 3. Moisture permeable and breathable. 4. High translucence, allowing 90% of light to 5.reach the crops. 6. Protects against light frosts, and raises soil and air temperature by severaldegrees centigrade. 7. Reduces wind damage. 8. Protects against birds and game. 9. Easy to lay by hand or by standard film-laying machinery. nonwoven agriculture cov
(Redirected from Retrofocus)
Angieux retrofocus
Introduced in:
1931 (cine)1950 (stills)
Author:
H. W. Lee of Taylor, Taylor and Hobson (1931)Pierre Angieux (1950)
Construction:
1+(4..5) elements in {{{groups}}} groups
Aperture:
f/2.5
The Angieux retrofocus photographic lens is a wide-angle lens design that uses an inverted telephoto configuration. The popularity of this lens design made the name retrofocus synonymous with this type of lens. The Angieux retrofocus for still cameras was introduced in France in 1950 by Pierre Angieux.
The telephoto lens configuration combines positive and negative lens groups with the positive at the front, so as to reduce the back focal distance of the lens (the distance between the back of the lens and the image plane) to a figure shorter than the focal length. The inverted telephoto configuration does the reverse, employing one or more negative lens groups at the front to increase the back focal distance of the lens possibly to a figure greater than the focal length in order to allow for additional optical or mechanical parts to fit behind the lens.
The inverted telephoto design was employed in the early Technicolor "3-strip" cameras since the beam splitter unit behind the lens took up much space, so that a long back focal distance was essential. This 1931 design was by H. W. Lee of Taylor, Taylor and Hobson (British patent no. 355,452). Also, wide-angle lenses for narrow-gauge movie cameras had to be of this type. Since the 35mm single-lens reflex (SLR) requires a space for the reflex mirror, it imposes a limit on the use of wide-angle lenses of normal designs, unless the reflex mirror is locked in the up position. The Retrofocus lenses addressed this situation by making wider lenses usable while retaining normal viewing and focusing.
Made in focal lengths of 24mm, 28mm and 35mm, the Angieux Retrofocus lens inspired all other lens makers to produce wide-angle lenses of this type for almost every 35mm single-lens reflex, and helped to make it the definitive camera type of the modern period.
References
Paul Gates. "An introduction to Angenieux lenses". http://www.mwclassic.com/articles/agenieux/ageniuex.htm.
Categories: Photographic lens designs(and so on) To get More information , you can visit some products about dance isis wing, Flower Pot Cover, . The nonwoven agriculture cover products should be show more here!